Вы можете приобрести редукторы, предлагаемые нашей компанией в Ростове на Дону. Так же продажа осуществляется в Нижнем Новгороде, Новосибирске, Челябинске, Перми, Екатеринбурге. Редукторы цилиндрические и редукторы червячные представлены нашей компанией в большом ассортименте. Электродвигатели — это машины которые незаменимы практически в любом крупном производстве. У нас Вы можете приобрести электродвигатели асинхронные и электродвигатели трехфазные.
phone: (863) 227-36-35; 227-38-37; 227-38-39; 227-36-27; 237-89-70; 237-89-71 | map |






HomeAboutProductsPrice listNewsContacts
Product catalogue


News

18.05.2012

On a warehouse has arrived the next batch of the centrifugal pumps AquamotoR ARCP.

18.05.2012

On a warehouse has arrived the next batch of pump stations AquamotoR AS ARJET-80S-24, AS ARJET-100S-24.

14.05.2012

On a warehouse has arrived the next batch of pump stations of AquamotoR AS ARQB-60-24 and AS ARQB-70-24.

Automatic pump controller AR РС-15

КОНТРОЛЛЕР НАСОСА AR РС-15
Field of application
 

Controllers of pump AquamotoR AR PC-15 allow to automate work of pumps. They switch-on pump at pressure decrease in water supply system (at opening of cranes etc.) and switch off the pump, at the water consumption termination (closing of cranes etc.) Besides, the controler protects the pump from its work without water («a dry course»). The controler is supplied by function of an automatic restart. Controlers are intended for pumping a clear water which is not containing firm particles. In the presence of firm particles, on a controler input it is necessary to install the filter. The Pressure gauge on the controler provides visual control of system pressure of water supply. 

 

Principle of operation
 
Controller AquamotoR AR PC-15 starts the pump within 20-25 seconds, after connection to the electric system. The subsequent start of pump occur in an automatic mode, at achievement of the established pressure of inclusion, at the water consumption beginning. Switching off the pump occur is delayed 7-15 seconds, after the water analysis termination. The controler should be installed in any point, located between a pump output and the first point of water analysis, as in vertical and horizontal position. After installation it is necessary to make sure to seal all connections.
 
The main technical characteristics
 
Power supply - 220-240 V ~ 50 Hz
Maximum current - 12 A
Degree of protection - IP 65
The maximum water temperature - 55 º C
Adjustments of pressure - 1.5-3.5 bar
Maximum pressure - 10 bar
Connections - 1 "

 




Special Offers


 

 
Certificates



Copyright 2009-2010 ©

Южная Торговая Компания - Ростов-на-Дону, Нижний Новгород, Екатеринбург, Новосибирск, Пермь, Челябинск